1D, 2D Extension Tube for Maglite
1D cell 2.37" Extension Tube
2D cell 4.73" Extension Tube
Inside diameter 1.345" (same as factory Maglite)
Outside diameter 1.549" (same as factory Maglite)
Fits Maglite 2D, 3D, 4D, 5D, 6D cell incandescent flashlights (more in fitment below)
These tubes will add either one or two D cell length to the body of your Maglite Flashlight. Multiple tubes can be combined to get even greater length such as 8 or 9 D cell Maglites. Making super long lights like a 12D is possible, but be aware striking something hard when using this like a weapon or a bat could cause the threads to break off. These tubes will fit the body of most newer maglites, but if your light was made before the year 2000 it may not because the bodies of some old lights were larger in diameter. The body and thread dimensions of newer LED maglites such as ML300L are also different than incandescent models If you want to check an old light measure the outside diameter of the threads on the tail cap. The OD of the threads on these tubes is 1.423" If your is significantly larger it won't fit.