4,200 Lumen Custom 2 D size Maglite (choice of color)
search
  • 4,200 Lumen Custom 2 D size Maglite (choice of color)
  • 4,200 Lumen Custom 2 D size Maglite (choice of color)
  • 5,000 Lumen 2 D size Maglite (choice of color)
  • 4,200 Lumen Custom 2 D size Maglite (choice of color)

4,200 Lumen Custom 2 D size Maglite (choice of color)

$194.98

-Increased Brightness: 4,200 lumens from 12 Latticepower high intensity LEDs, with a range of 144 meters.

-2 D cell size Maglite host

- Body sleeve and short spring conversion for 2x 26650 use

- High temp glass lens

- User selectable modes

Batteries: Yes - Pair of Keeppower Protected 5500ma 26650s +23.98
Charger: No
Choose Color: Black
Quantity
In Stock

Grade
Read user reviews (4)

Fully converted and ready to go!   This 2 D size is equipped with the full power of the Lumencraft 12x CREE XTE Superbulb™.  Also installed are the 2x 26650 body sleeve, recessed tail spring, and high temp glass lens.

If you already have 3.7V 26650 batteries or the charger select "No thanks" from the include options listed above.   2x 3.7V cells are required to use this light.  1.5V D batteries will not work.

Note: This product is custom so even when it's in stock there will be a lead time before shipment.  Common color bodies like black typically ship within 3-4 business days, other colors that have to be ordered may take 6-10 days before they are ready to ship.

The bulb is a simple 3 mode Low, Medium, High with memory by default, however its easily customized for those who like a taste of something different.

Run time approximation(based on use of 2x 26650 cells):High: 50 min
Med: 3.5 hours
Low:  87 hours

User interface (2024 update):

DrJones Guppy2drv.  This firmware allows the ultimate in user customizability, with 22 built-in mode groups, that the user can select via a series of button presses and the option of user programmable turbo timer that will automatically step the power down to 50% after the set time is hit (see below for instructions).
ML on the chart means Moon Light which is is less that one percent power.

User Selectable Groups:

  1. 2% - 25% - 100% | Memory
  2. 100% - 25% - 2% | No Memory
  3. 2% - 25% - 100% - Strobe - Beacon | Memory
  4. 2% - 25% - 100% - Strobe - Beacon | No Memory
  5. 15% - 100% | Memory
  6. 100% - 15% | No Memory
  7. 100% Only
  8. 100% - Strobe | No Memory
  9. Strobe - 100% | No Memory
  10. ML - 5% - 33% - 100% | Memory
  11. 100% - 33% - 5% - ML | No Memory
  12. ML - 5% - 33% - 100% - Strobe - Beacon | Memory
  13. ML - 5% - 33% - 100% - Strobe - Beacon | No Memory
  14. ML - 100% | No Memory
  15. 100% - ML | No Memory
  16. ML - 100% | Memory
  17. ML - 5% - 15% - 50% - 100% | Memory
  18. ML - 5% - 15% - 50% - 100% | No Memory
  19. 100% - 50% - 15% - 5% - ML | Memory
  20. 100% - 50% - 15% - 5% - ML | No Memory
  21. 2% - 15% - 50% - 100% | Memory
  22. 2% - 15% - 50% - 100% | No Memory


Guppydrv ​Instructions

To switch mode groups: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash. With the light in programming mode, tap the switch the same number of times as your desired mode group. The light will blink and your mode group will be memorized.

Example: To select mode group 3, tap the switch 8 times quickly to enter programming mode. As soon as the light enters programming mode and beings flashing, tap the switch three times. The light will blink to recognize the mode group change.

To set the turbo timer: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash. With the light in programming mode, tap the switch 30 times to enter the turbo timer set mode. The light will then switch to 100% power. When the light is at the desired temperature for the turbo step down, turn the light off. The turbo timer will then be set. The turbo timer steps the light down to 50% regardless of the mode group set.

To disable the turbo timer simply go into program and cut it off in >3 seconds.

Here is a short video on how this UI works.
https://www.youtube.com/watch?v=_ug0I8cDFOM

Disclaimer:

Lumencraft is not affiliated with Mag instrument inc. which owns the MAG family of trade marks including Mag-Lite and Mini-Maglite.  Custom shorty flashlights are not made, endorsed,  recommended, licensed or approved  by  Mag instruments inc.

Please Note: These batteries are very high powered, and have the potential to cause fire, eye injury, burning of skin and other. 

Lumencraft is NOT responsible for accidents or damage including but not limited to fire or personal injury resulting from use or misuse of its products.   By purchasing you agree to these terms.

Comments (4)
Grade
No customer reviews for the moment.