2x 26650 to 2D Battery Sleeve for Maglite

2x 26650 to 2D cell sleeve fits a pair 26650s and uses the Lumencraft "Shorty" tail spring (We recommend using Protected cells to prevent over discharge of the batteries.). You will need to remove the anodizing inside the tail cap of your Maglite for this kit. This sleeve has a short brass screw and nut in the top. If you use Keeppower protected cells you will not need the included magnetic spacers to make contact between the cells. If you're using other flat top cells you will need a magnet between the two of them. This kit is perfect for use with the Firefly 280 lumen, 800 lumen or the Lumencraft 5000 lumen bulbs. Sleeve dimensions 5"L x 1.3"W.

Magnets: 2pc 8mm x 2mm
These are used to make contact between a pair of 26650 batteries if your cells are not button top and don't already make contact with each other end to end. Most cells are magnetic on the + end however not all are. If yours are not an alternative is to place the magnets on the top and put a dab of epoxy around the edge of them to hold in place. You do NOT need the magnets with house 26650s.

This video outlines how to install the body kit.